One size fits all...or one size fits none
EMAIL THIS STORY
| PRINT THIS STORY
June 27, 2019
In a world in which the economies of scale don’t always economize, I keep running into situations and/or conditions that result from trying to make something do too much. The classic example (other than those one-size-fits-all bunny suits in ORs across this great land of ours—I always end up looking like late-model Elvis, Vegas edition) is the temperature log that is used for food refrigerators, medication refrigerators, etc. As a general rule of thumb, unless the temperature range for each of the refrigerators being monitored is the same (and never mind trying to mix Fahrenheit and Celsius), then you are just asking for trouble. “Pushing” staff to have to discern between competing “out of range” temperature values requires an almost infinite amount of attention, and while there is, in certain instances, some overlap (food is usually 33-40 degrees F and medication 36-46 degrees F, so 36-40 works for both), it just makes so much more sense to limit confusion to the extent possible. And, to my mind, that means individualized temperature logs. One quick note regarding temperature logs for freezers, if your log doesn’t have a temperature “safe” range clearly indicated, I’ve been seeing a lot of mix-ups regarding those pesky negative numbers. For instance, if you establish a target of -15 degrees or colder, -10 degrees would be considered an -out-of-range value, but in talking with the folks doing the monitoring, they “think” of “10” being less that “15,” kind of missing the whole negative number dynamic. I won’t say that this is happening everywhere, but I have run into it in a couple of instances, so that’s something to keep an eye on.
Turning to the Oddities page, I was cruising through The Joint Commission’s FAQ page (admittedly, looking for blog fodder) and came across something of a puzzle; in the text of the FAQ dealing with the “old” requirement of the building assessment as a function of the Statement of Conditions (the old Part 3, which is no longer available) and has not been since 2007. But if you look at the text of LS.01.01.01, the second performance element indicates that a building assessment is required (at time frames to be determined by each organization) to determine compliance with the Life Safety chapter of the Joint Commission manual. I guess the thing that struck me about this happenstance is that the FAQ would have a good opportunity to indicate that the building assessment has evolved (or mutated—your pick) into its present day purpose as an exercise in assessing your building for compliance with the LS chapter. Maybe they just haven’t gotten around to updating this FAQ (it is a ways down the FAQ page), and I suppose it is no more than a curiosity.
Don't forget to visit Mac's Safety Space blog!